Pepin Manufacturing

No, the customer will be responsible for the shipping costs.

If you need a tight 90-degree angle we recommend the .015.  However, if you need more of a rounded corner, the .022 or .030 thickness may work better.

There are many variables such as the metal type, hardness, and the applied pressure of the machine.

We have tested the tack of Lint Busters® and the top 12 leading lint rollers on the market. Pepin Manufacturing Inc. uses the Standard Test Method for Tack of
Pressure-Sensitive Adhesives by Rolling Ball (ASTM Standard D 3121-94) to test accurately. This involves rolling a steel ball down a 30-degree slope and across 12
inches of lint roller tape to determine how far the ball rolls before stopping. In our test results, our products came out above the rest. See the results below.